What matters should be paid attention to during the early installation of solar power street lamps?

If you want solar power street lamp to have a long service life, but do not want the street lights to have light decay in a short time, then you should pay attention to these three points when you install the street lights in the early stage.

1. Installation location

When installing street lights, you should choose some suitable locations. At least make sure that the solar panel is open and free of any obstructions, otherwise, it will affect its photoelectric conversion efficiency, and you cannot choose a place with a backlight. You must ensure that the solar panel can be Accept normal light and ensure the duration of light.

In addition, although installing solar power street lamp does not need to dig a hole to bury cables like ordinary street lights, it still needs to dig a hole to make a cement base. Therefore, when installing a solar power street lamp, attention must be paid to avoid burying natural gas and other pipelines to prevent Derive more accidents.

2. The part of the light source and the battery panel

For the battery panel, first, pay attention to avoiding wearing metal jewelry during installation to avoid affecting the battery panel. The connection between the two designs and the wire should be prevented from falling off and leaking, and the connection should be tight. And pay attention to the aesthetics, and the firmness of the screws must be appropriate, otherwise, the phenomenon of the slippage will have bad consequences.

In addition, the angle and orientation of the solar panel during installation should be based on the principle of receiving large light conditions, and can not be installed at will, so that it can play its role to a large extent.

3、The soil part of the street lamp installation

The specific installation depth and width should be based on parameters such as the height of the pole, grasp the size and other data, and operate in strict accordance with the construction drawings. In addition, pay attention to the local soil quality. When installing, pay attention to keeping the embedded parts, foundation, and original ground on a uniform level, which can better ensure the verticality of the light pole to the ground.

For example, if the solar power street lamp is installed with soft soil, it needs to be buried deeper to ensure its stability. It also depends on the local climatic conditions. If the local climate is often windy and heavy, the first choice is the light pole. , The design should be thicker and thicker, and the depth of the foundation should be deeper to avoid unsafe accidents such as the tilt of the light pole due to serious stress, and to ensure the quality of its own use.

Author: Yufai
This article was adapted from its original source: