What are the factors that determine the brightness of solar street lights

The installation of 100w led solar street lights is also a very important part, and the most important part of the installation is the installation distance of solar street lights. There are many factors that affect the installation distance. The product parameters of the LED solar street light play the most important determinant. Secondly, it will also be affected by other factors such as road conditions.

In general, the installation spacing of solar street lights mainly revolves around the following two points:

1. Lighting method

Lighting methods are divided into: one-side lighting, two-side cross lighting, and two-side symmetrical lighting. For special roads such as intersections and curves, lighting can be arranged as appropriate according to the actual situation.

2. The pole height of the 100w LED solar street light

Scenic spots and parks generally prefer street lights with a height of about 7 meters, especially for new rural construction roads with a width of about 7 meters. In the nighttime environment, there are not many pedestrians and traffic flow on rural roads, so it is generally installed by means of unilateral interactive lighting, ensuring that the installation distance is about 20-25 meters. If it is less than 20 meters, it will affect part of the lighting. In addition, one more street light should be installed at the corner to avoid lighting blind spots.

If you want to install a street light with a pole height of 8 meters, it is necessary to ensure that the distance between the street lights is 25-30 meters, and the installation should be carried out by crossing the lights on both sides. The method is mostly used when the road lighting width is required to be 10-15 meters.

The installation spacing of solar street lights with a light pole of 12 meters is to install a road with a 12-meter light pole. The longitudinal spacing of solar street lights is generally recommended to be 30-50 meters. The symmetrical lighting on both sides should be used, and the road lighting width needs to exceed 15 meters. For some, as long as the illuminance value is reached according to the requirements, there are no rigid requirements. The 60-watt split solar street light is a good choice. If you need to choose a 30-watt integrated solar street light, the distance can reach 30 meters.

If the distance between the installed 100w led solar street lights is close, it is unreasonable, and it is easy to waste resources, and at the same time, the investment cost is relatively large. Installation according to the above requirements can greatly ensure the demand for road lighting, and at the same time will not cause waste of resources. Of course, there are many kinds of solar street lights, and there are many options for configuration, so it is impossible to give suggestions here. Guangdong Foshan Wisdom Light New Energy Technology Co., Ltd. is a high-tech enterprise focusing on new energy research and development, IoT intelligent lighting control system development, hardware design and production and overall solutions. Provide customers with one-stop solutions for street lamp research and development, design, production, installation, maintenance, intelligent control, etc., and meet customers' personalized street lighting needs from all aspects of hardware and software.

Author: Yufai
This article was adapted from its original source: