Solar street lights are more expensive than ordinary street lights

Solar led street light manufacturers to tell you that the price of solar street lights is higher than that of ordinary street lights, and at the same time, the quality is also greatly improved. Let's take a look.

1. If it is a construction of the same scale, taking all costs into consideration, the initial investment of solar street lights is similar to the initial investment of ordinary lamps.

2. For ordinary lamps, the installation cost varies according to the scale and the price is different. The larger the scale, the higher the related costs. Compared with solar street lamps, solar street lamps will save a lot.

3. The transportation cost of ordinary street lights is obviously higher than that of solar street lights during transportation, and the cost of large quantities will increase.

4. Solar street lights are easily affected by weather and the environment during use. Now it is possible to change this stability through technology and control methods.

5. Ordinary lamps and lanterns need to consume a lot of electricity during the use process, while solar street lamps do not need to support additional electricity bills and have a longer service life.

6. Solar street lights are more independent during operation and are easier to be controlled under the condition of rapid technological development.

As an important part of street lamps, the quality and opening method of lamps are very important. Solar led street light manufacturers remind you to buy street lamps. The material must be aluminum casting alloy, the thickness must meet the requirements, and no cracks or holes in the lamp body are allowed. , There must be a good contact point at the connection of each component, and the buckle part is the most important thing. Because of the unreasonable buckle design of the previous lamps, a large number of lamps are damaged after each strong wind. Therefore, it must be used on the lamps. Two spring buckles are easy to install. The upper part of the lamp is opened directly, and the important parts such as the ballast are fixed on the lamp body to prevent the parts from falling off after the lampshade is damaged and causing a safety accident.

Author: Yufai
This article was adapted from its original source: